- 您现在的位置：买卖IC网 > Sheet目录253 > SR05.TCT (Semtech)IC TVS ARRAY 2-LINE 5V SOT-143
SR05
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of Two
High-Speed Data Lines
The SR05 TVS is designed to protect two data lines
from transient over-voltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V F ) the
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 2 and 3. The nega-
tive reference (REF1) is connected at pin 1. This pin
should be connected directly to a ground plane on the
board for best results. The path length is kept as short
as possible to minimize parasitic inductance.
The positive reference (REF2) is connected at pin 4.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
pin 4 directly to the positive supply rail (V CC ). In this
configuration the data lines are referenced to the
supply voltage. The internal TVS diode prevents
over-voltage on the supply rail.
2. The SR05 can be isolated from the power supply by
adding a series resistor between pin 4 and V CC . A
value of 10k ? is recommended. The internal TVS
and steering diodes remain biased, providing the
advantage of lower capacitance.
3. In applications where no positive supply reference
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pin 4 is not connected. The steering
diodes will begin to conduct when the voltage on
the protected line exceeds the working voltage of
the TVS (plus one diode drop).
ESD Protection With RailClamps
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
the reference voltage plus the V F drop of the diode.
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
? 2005 Semtech Corp.
4
www.semtech.com
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
SR12.TCT
IC TVS ARRAY 2-LINE 12V SOT-143
SR3.3.TCT
IC TVS ARRAY 2-LINE 3.3V SOT-143
SR70.TCT
IC TVS ARRAY 2-LINE 300W SOT-143
SRB22A2BBWNN
SWITCH ROCKER SPST 10A 125V
SRDA05-4.TBT
IC TVS ARRAY 4-LINE 5V 8SOIC
SRDA05-4R2G
TVS ARRAY LO CAP 500W 8-SOIC
SRDA3.3-4.TBT
IC TVS ARRAY 4-LINE 3.3V 8SOIC
SRDA3.3-4DR2G
IC TVS ARRAY 4-LINE 3.3V SO-8
相关代理商/技术参数
SR05.TCT
制造商:Semtech Corporation 功能描述:TVS Diode
SR05.TCT-CUT TAPE
制造商:SEMTECH 功能描述:SR Series 20 V 6 pF SMT RailClamp?Low Capacitance TVS Diode Array - SOT-143
SR05_05
制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:RailClamp? Low Capacitance TVS Diode Array
SR0500472
功能描述:罩类、盒类及壳类产品 MODIFIED 20" DEEP RMCV190313BK1
RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red
SR0500473
功能描述:罩类、盒类及壳类产品 MODIFIED RMP1913 20#
RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red
SR0502101ML
制造商:ABC 制造商全称:ABC Taiwan Electronics Corp 功能描述:SMD POWER INDUCTOR
SR0502102ML
制造商:ABC 制造商全称:ABC Taiwan Electronics Corp 功能描述:SMD POWER INDUCTOR
SR0502121ML
制造商:ABC 制造商全称:ABC Taiwan Electronics Corp 功能描述:SMD POWER INDUCTOR